Tripoli Mid-Ohio

Please login or register.

Login with username, password and session length
Advanced search  


If you're having issues with login,
Click the login link above the text boxes.
Log in on the next page.

Author Topic: Quest Q2G2 Initiators  (Read 3137 times)

0 Members and 2 Guests are viewing this topic.


  • Newbie
  • *
  • Posts: 48
    • View Profile
Quest Q2G2 Initiators
« on: February 22, 2020, 05:01:48 PM »

Do the Quest Q2G2 initiators behave nicely with TMO's launch controllers?
I've read the Q2G2 initiators were designed for 9V power, and continuity checks on some higher power controllers may cause the initiator to set off.
Hoping i can use the Q2G2's for a 3 x Estes F15 cluster, in my 1/70th scale Falcon Heavy prototype.



  • Newbie
  • *
  • Posts: 23
    • View Profile
Re: Quest Q2G2 Initiators
« Reply #1 on: February 23, 2020, 02:16:58 PM »

I would say absolutely. I and several fliers use dipped Chinese fireworks e-matches as initiaters. Assuming you're familiar with ohm's law, current is the issue, not voltage. My matches with the orange leads are All fire at 370 ma, All safe at 250 ma. Continuity test at 0.5 ma. Quest all fire is 350 ma, all safe is 150 ma. To my knowledge, our Wilson FX system has never lit any initiator due to continuity test.
Doug Peterson Tripoli 15622 hpr cert. Lvl. 2